The Nora Standard Output 24v tape light NUTP1-16LED comes in 16' rolls that are easily separable and connect-able every 12". It is possible to field cut every 4". There are 65 lumens, 18 LEDs, and 1.4w per foot with the 3000k. Maximum run 66' with 100w electronic driver, 48' with a 96w magnetic driver. The LED light tape is dimmable with a dimmable power supply like the magnetic NMT-96/24c2 power supply. Light tape is hardwire capable with NUSP-Jbox. Installs with pre applied tape, clips or channel, ok for wet locations. dimensions- 1/16" by 9/16. Color choices blue, green, red, yellow, cool white(4200k), and warm white(3000k).

Spec Sheets  , Installation Instructions,   If help is needed putting together a system email with your situation.

Standard Output LED Tape Light KIT NUTP1-16LED30PS

• 16' of tape light
• Pack of 15 clips
• 1- 9" power line interconnector
• 5- shrink wrap tubes
• 1- 24w plug in driver

Nora 24v LED standard kit Price: $288.00 Shipping: $0.00 3000k warm white4200k cool whitebluegreenredyellow

Ships from warehouse in one to three days

                        Make Your Own Set Up

Driver and connectors needed offered below

Nora 24v LED tape light 16' roll Standard Price: $270.00 Shipping: $0.00 3000k warm white4200k cool whitebluegreenredyellow

                             Available Drivers

 NATL-524, or -545 direct plug in Electronic driver 24w or 45w. the 24w runs up to 16' of standard tape light, and th 45w runs up to 30'. The powerline connector NAHO-609 is needed between driver and light tape.

Nora NATL-524 -545 electronic driver Price: $24.00 Shipping: $0.00 24w45w

NATL-530HW Class ll Electronic Driver available in 30w or 60w. The 30 watt can run up to 20' of swtandard tape light, and the 60w can run up to 40' of tape light. Needs cord (NRA-6035) for plug in, or (NUSP Jbox) and connector (NRA-125) for direct wire.

Nora NATL-530HW Driver Price: $71.00 Shipping: $0.00 30 Watt60 Watt

NATL-5100 Class ll Electronic Driver 100w can run up to 66' of standard tape light. Cord can be cut for direct wire Jbox needed.

Nora NATL-5100 Price: $135.00 Shipping: $0.00

NMT Class ll Hardwire Dimmable Magnetic Driver available in 60w, or 96w. The 60w can run 30' of standard tape light, and the 96w can run 48' of standard tape light. The magnetic drivers de-rate 25% for max load. This magnetic driver is dimmable by a house low voltage magnetic dimmer switch purchased elsewhere. Connector NALTL-10 and connector NAHO needed to connect to light.

Nora NMT-60/24c2 or 96/24c2 magnetic driver Price: $162.00 Shipping: $0.00 60 Watt96 Watt

NUSP-Jbox for direct wire situations. For use with the electronic drivers NATL-530hw, and NATL-5100. A NRA-125 connector is needed between the jbox and the driver.

Nora NUSP-Jbox Price: $15.00 Shipping: $0.00

                      Connector Options

The NATL-509 power line interconnector is for use between the driver and the Tape Lighting. There is a choice of 9", or a 11" with a switch.

Nora NATL-509 power line interconnector for high output tape light Price: $6.00 Shipping: $0.00 9 inch11 inch

NATL interconnection cables light to light connections. The choices of lengths are 2", 6", 18", 36", and 72".

Nora NATL interconnection cable standard tape light Price: $6.00 Shipping: $0.00 2 inch6 inch18 inch36 inch72 inch

NATL-300, or -301 interconnection splitter cables light to light connections. The choices are a Y-3 way splitter, or an X-4 way splitter.

Nora NATL interconnection splitter cable standard tape light Price: $12.00 Shipping: $0.00 Y 3 wayX 4 way

NATL-403 end cap for high output tape light.

Nora end cap for standard tape light Price: $2.00 Shipping: $0.00

NATL-400 shrink wrap for field connections to keep wet location rating.

Nora shrink wrap Price: $2.00 Shipping: $0.00

NATL-401 Mounting clip pack of 15, used in conjunction with the sticky tape on the lights

Nora tape mounting clips 15 pack NATL-401 Price: $6.50 Shipping: $0.00

NATL-420B Mounting channel 4' aluminum

Nora tape mounting channel 4' NATL-420B Price: $15.00 Shipping: $0.00 whiteblack