| Nora Dimmable LED Under cabinet Lights 24V |
|
NULB LED SERIESThe Nora Lighting linear bar LED under cabinet light is a dimmable 24V lighting system. A LED driver, dimmer, and connection cords are purchased separately. This unit can be direct wired with a Jbox(NUSP-Jbox), and is dimmable with the between light and driver dimmer(NAL-250), or by using an house magnetic low voltage dimmer and the dimmable magnetic LED driver(NMT-60/24c2). There is also a choice of light type of 3000k(warm), or 4200K CCT(cool), All lights have 50 lumens per watt and 3.3 watts per foot. The available Sizes are 6",12",24",36", and the 48". The available Colors are Aluminum, and Bronze. Spec Sheet , Installation Instructions If you need help putting together a system email us with your situation.
Mounting hardware and 1 light to light connector included, necessary LED drivers and connectors available below.
Necessary Accessories
Example Direct Wire Sequence to Electronic Driver
Example Plug Into Outlet Sequence to Driver
Example Magnetic Dimmable Driver Sequence
LED Driver Options
NATL-530HW Class ll Electronic Driver available in 30w or 60w. The 30 watt can run up to 9' of lights, and the 60w can run up to 18' of lights. Needs cord (NRA-6035) for plug in, or (NUSP Jbox) and connector (NRA-125) for direct wire. Dimmable with the low voltage dimmer between the driver and the lights available below.
NATL-5100 Class ll Electronic Driver 100w can run up to 30' of lights. Cord can be cut for direct wire, Jbox needed. Dimmable with the low voltage dimmer between the driver and the lights available below.
NMT Class ll Hardwire Dimmable Magnetic Driver available in 60w, or 96w. The 60w can run 10' of lights, and the 96w can run 20' of lights. The magnetic drivers de-rate 25% for max load. This magnetic driver is dimmable by a house low voltage magnetic dimmer switch purchased elsewhere.
NAL-250 Dimmer for electronic drivers. This dimmer is put between the electronic driver and the lights. Includes connections to the driver and 2 runs of lights, if the first run of lights needs a longer connector than 6" then use NAL-220 coupler and an inter light connector cable NAL-2.
NUSP-Jbox for direct wire situations. For use with the electronic drivers NATL-530hw, and NATL-5100. A NRA-125 connector is needed between the jbox and the driver.
Connector Options
NAL-208 Power line interconnector is used between the driver and the lights when there is no dimmer being used. There are 3 sizes of interconnectors: The 12" with a switch, the 20", and the 72".
NAL-2 interconnection cables light to light connections for spaced installations. The choices of lengths are 2",6", 18", 38", and 58"
NRA-125 connector for between the NUSP-Jbox and the NATL-530 or 560 electronic drivers. The choices of lengths are 6", 12", 18", 72".
NALTL-10 or -30 is used between the NMT-60/24c2 or-96 magnetic driver, and the NAL-208 power line interconnector to light.
NRA-6035 cord for the NATL-530HW electronic driver to outlet.
|
